Here is a quick how-to explaining how to remove and clean the interior blower motor. This is the fan that blows fresh air into the cabin of your car. There is a filter that should be replaced every 6 to 12 months, but if there is debris in the blower motor fan, then a new filter won’t help. My car had always sounded like a team of fighter jets were coming through my vents when I cranked up the fan ever since I bought her – I thought, “Man, this car is perfect if it only didn’t have such a loud-ass fan!”
If your fan is loud, I recommend doing this procedure. It doesn’t take that long, but you will have to perform some amazing feats of dexterity and nimbleness to get access to this fan. Acrobatic or advanced yoga skills are highly recommended.
Next, you have to remove the fiber top to the footwells. It is held in place by two black plastic clips going into the trim above it, just below the glove box. Use a pair of needle nose pliers or flat screwdriver to remove the clips, so you don’t rip the fiber panels.
Now, it’s time to do some stretching – maybe run a few laps, some jumping jacks… You need to look up inside the center console, above the footwell area, and behind the cabin air filter (which is white in the pic, and says “Air Flow ->”
If you position yourself upside down, behind that area, you will find the blower motor, secured with 3 screws. Removing these screws is my favorite part. Once off, the cover will come right off, and the blower is directly inside. Note which direction the tabs are pointing, so it can be put back, as it only fits in one way.
All this is well worth it, especially if yours looks like mine did:
Remove the debris, and put the blower motor and cover back on, then replace the footwell cover and plastic cover. Now go take a shower, as you have blower dirt and floor debris in your hair!