ECU Tunes for the 1.4 L turbo engine by MTD

Supported Cars:

– Abarth/Fiat Punto EVO ( 8GMF )
– Abarth/Fiat 124 Spider ( 8GMK )
– Abarth/Fiat 500 (8GMW)
-Abarth/Fiat 500x (8GMK)
– Alfa Mito ( 8GMF )
– Alfa Giulietta ( 8GMF, 8GMK )
– Alfa Romeo Giulia/Stelvio 2.0 Turbo (10ja)
– Dodge Dart 1.4L (8GMW)
– Jeep Renegade 1.4


MULTIAIR ECU STAGE 1 REMAPPING

MTD Offers  unique and powerful Remapping for your Multiair, starting at $559.00. We can build a specific tune for your mod list!

NOTE: In order to Read & Flash your ECU, you will need a flash tool. MTD Does not provide this tool

Hardware change on Stage 1 remaps is not needed.

MTD Stage 1 features:

– Custom Calibration depending on your needs. ( Fuel and more )
– No physical removal of ECU is required. You can install the file using OBD from your car
– Increased Horsepower
– Increased Torque
– Maintain Engine Protection & Safety
– Smoother Accelerations


MULTIAIR ECU STAGE 2 REMAPPING

Stage 2 Requirements

– Bigger Exhaust

– Air Filter
– [Optional] Stage 1 or Stage 2 Camshaft. More Horsepower & torque!

MTD Stage 2 features

– Custom Calibration depending on your needs. ( Fuel and more )

– No physical removal of ECU is required. You can install the file using OBD from your car

– Increased Horsepower

– Increased Torque

– Maintain Engine Protection & Safety

– Smoother Accelerations


MULTIAIR ECU STAGE 3 REMAPPING

Stage 3 Requirements

– Bigger Exhaust

– Air Filter
– Bigger Turbo
– Larger Fuel Injections (390cc recommended)
– [Optional] Stage 1 or Stage 2 Camshaft. More Horsepower & torque!
– [Optional] Tuning box. +100 Euro to the price.

MTD Stage 3 features

– Custom Calibration depending on your needs. ( Fuel and more )

– No physical removal of ECU is required. You can install the file using OBD from your car

– Increased Horsepower

– Increased Torque

– Maintain Engine Protection & Safety

– Smoother Accelerations
– 7200 RPM Limiter
– [ Without tuning box ] Boost 1.65 bar over, 1.5 bar constant, 1.35 bar at limiter
– [ With tuning box ] Boost 1.65 bar constant


NOTE: In order to Read & Flash your ECU, you will need a flash tool. MTD Does not provide this tool

After purchasing the ST3 Remap, please send us your File at tuning@multiair-tuning.com . Please write also your Order ID.
We will reply back with your tuned file

Please fill out and submit the form below for more information, or to purchase one of our products.

www.multiair-tuning.com