FMIC and Intercooler (IC) Pipes

I asked my wife if I could bring this to bed…20150727_233900
Needless to say, she was not nearly as excited as I was about the new FMIC!


FMIC time! ! ! ! It’s time to do some installation fun! I got some tips from some very helpful members on the .org, and the DRP pipes arrived in the mail, too! Yippee!
20150711_124315
20150806_080028
20150805_182329

So I am using my buddy’s garage, and I’m doing all of the final mods at once, so I don’t have to keep pulling the front fascia off. I have the front end off, as well as the aero panels and intercooler shrouds, and now I’m ready to tackle the challenge before me!
20150813_210659
20150813_210708
20150813_215010
20150813_215017
20150814_203611
20150814_203620

I also now have full 2.5″ coming in to the engine, the intercooler & pipes, as well as going back out through the exhaust.

This is the weak, stock FMIC:
20151012_204857

New FMIC:
20150815_200515
20150815_200523
20150815_200545
20150815_200558
20150815_200606
20150815_200615
20150815_231927
20150814_232847
20150814_232853
20150815_002122
20150815_002130
FMIC – how to / installation / part list

@jrobmsu (at dodge-dart.org) asked me about the FMIC on Facebook, so I’d thought I would elaborate, as I spent a ton of time doing research on this topic with people who know more about it than myself. First of all, the stock FMIC is 27 X 7 X 2.5, or 337.5 cubic inches. You don’t really want one twice the size, or larger, as others have confirmed that it takes the turbo a lot longer to spool up, and you would lose precious low end torque. On the other hand, the stock IC is pretty weak, so even a third party unit would likely be more efficient at the same size.

There are kits out there, but quite expensive. I put in one from ebay, that is 28 X 7 X 2.5, or 490 cubic inches. IMO – this one is perfect. Perfect fit, good width, and everything connects pretty solid. If you stick with 2.5″ I/O you will have the best possible air flow, but it is tight to fit in there, so you have to massage the hoses to fit them in a bit. I took some images of what I purchased last year, so hopefully, this will help someone else out, too. I didn’t know jack-squat before this car, so I’m learning as I go, as I fix other stuff for a living, so this is very interesting to me.

Here is an example shopping cart from ebay of everything you need, assuming you have 2.5″ IC pipes, such as the DRP. You need two of the 90º couplers, & several clamps. I cut the aluminum pipe in half, one for each side. Remember to put the clamps in a direction where you could access it without the fascia off the car, in case you have to change something later.

intercooler part list

Tags:
Categories: