Last night I started the shadow lights LED installation. There are a few threads about this topic, but none of them actually contain correct information, or at least complete information. The (-) side connected to the door ajar sensor (purple) so it comes on when the door is opened, but there is no 12V+ constant. The door locks are constant power, but only put out +2V, which is not enough to power the lights. I connected the 3 doors to accessory power (orange wire with blue stripe) and I’m running a dedicated constant power lead to the driver door. People are going Ape-Shit over these on FB – and I can’t believe how bright these are glowing! They are 7W, and they use Cree bulbs – I had them custom made with my logos.
front doors:

back doors:

I finished the remaining 2 shadow lights, one logo for the front doors, and the Record Label logo for the rears. FYI – there is a 12V+ constant hot in the driver’s side door. It is a red wire that runs up to the mirror – plain red, no stripe. The door ajar (-) is still purple, but now the door will show the puddle lights when there is no key in the ignition, and there were no wires to fish through the door! Shazam!